Read Consulting

Materials Failure Analysis and Process Engineering

  • Home
  • About
  • Contact
FacebookTwitterLinkedinYouTubeRSS Feed

Home Featured

  • Experience
  • Failure Analysis
  • Processing
  • Laboratory
  • Blog
  • White Papers
You are here: Home / Archives for Failure Analysis

Read Consulting Failure Analysis Blog

In addition, READ CONSULTING provides services to industry in the areas of failure analysis, process development and process improvement. Read Consulting is prepared to use its experience and expertise to analyze customers' specific problems.

Glass Failure Expert Witness Analyzes Failed Wine Bottle

November 10, 2009 By Tom Read Leave a Comment

Glass expert performed a root cause failure analysis of a broken wine bottle. The bottle had broken at the neck into three pieces (Upper left photograph). One piece still contained the cork with the cork screw still in place. In this case the cork screw was off center and had exited the cork when it […]

Filed Under: Failure Analysis Tagged With: Bottle, Glass Expert, Operator Error, Wine Bottle

Wine Bottle Failure Analysis

November 6, 2009 By Tom Read Leave a Comment

Glass Failure Analysis Expert Witness Performs Wine Bottle Failure Analysis. In this product liability case the user was injured as the cork was being extracted. The glass failure expert witness performed a glass failure analysis and determined that the bottle failure initiated at the very top of the bottle. Thus, the cork screw could not […]

Filed Under: Failure Analysis Tagged With: Bottle, Corking Damage, Expert Witness, Glass, Wine Bottle

Failure Analysis Expert Witness Examines Failed Rivet

October 28, 2009 By Tom Read Leave a Comment

A failure analysis expert witness performed a rivet fialure analysis of a rivet involved in a ladder failure. The failed rivet, which is a hollow end rivet, was found to be too short for the intended application. The photo on the upper left is a cross section of the failed rivet in question. The clinch […]

Filed Under: Failure Analysis Tagged With: Clinch Allowance, Failed Rivet, Fatigue

Failure Analysis of Corroding Stainless Steel Probe

October 20, 2009 By Tom Read Leave a Comment

  Failure analysis expert was asked to determine the cause of deterioration of the tip of a stainless steel (SS) probe used to measure the level of hot tomato juice in a vat. Chemical analysis identified the steel as 304 SS with 0.082% carbon. At best, the carbon limit is on the high end in […]

Filed Under: Failure Analysis Tagged With: Corrosion, Stainless Steel, Stainless Steel Probe

Glass Failure Analysis Expert Examines Failed Champagne Bottle

October 14, 2009 By Tom Read Leave a Comment

Glass failure analysis expert performed a root cause failure analysis on a exploding champagne bottle. The user claimed that the bottle exploded when she was using her thumbs to remove the cork. Examination of the bottle revealed a horizontal crush point. This damage was severe and would not have survived the corking operation at the […]

Filed Under: Failure Analysis Tagged With: Bottle, Champagne Bottle, Glass, Liability Hoax

  • « Previous Page
  • 1
  • …
  • 38
  • 39
  • 40
  • 41
  • 42
  • …
  • 53
  • Next Page »

Read Consulting Failure Analysis

Thomas L. Read, PhD,
1435 Fulton Road Santa Rosa, CA
Phone: 707-494-5089
email: info@readconsulting.com

  • Home
  • About
  • Experience
  • Expertise
  • Laboratory
  • Failure Analysis
  • Blog
  • White Papers

Read Consulting Failure Analysis

Thomas L. Read, PhD,
1435 Fulton Road Santa Rosa, CA
Phone: 707-494-5089
email: info@readconsulting.com

Connect With Read Consulting

FacebookTwitterLinkedinYouTubeRSS Feed

Registered Professional Engineer

Thomas L. Read, PhD., CEO
Registered Professional Engineer
Certificate No. MF002174
State of California.

Copyright © 2025 Read Consulting · Materials Failure Analysis And Process Engineering