Read Consulting

Materials Failure Analysis and Process Engineering

  • Home
  • About
  • Contact
FacebookTwitterLinkedinYouTubeRSS Feed

Home Featured

  • Experience
  • Failure Analysis
  • Processing
  • Laboratory
  • Blog
  • White Papers
You are here: Home / Archives for Automobile

Device Patent Dispute: Automobile Rear View Mirrors

January 18, 2012 By Tom Read Leave a Comment

Read Consulting, a California failure analysis laboratory, often becomes involved with device patent disputes. In this case a patent dispute focused on external automobile rear view mirrors that had integral flashers showing through openings in the mirror. The assembly consisted of an array of LED lights that were behind the mirror, and these flashed through […]

Filed Under: Failure Analysis Tagged With: Automobile, Glass, Rear View Mirrors

Shaping Flat Glass

May 26, 2010 By Tom Read Leave a Comment

Glass expert describes the condition of the edges of windows, mirrors and other flat glass pieces. Almost all flat glass pieces are shaped from larger pieces using glass scribe and break techniques. Thus the edge of the part has two distinct sides. The photograph above is a microscopic picture of a the edge of an […]

Filed Under: Failure Analysis Tagged With: Automobile, Glass, Safety Glass, Window

Glass Failure AnalysisExpert Examines Cracked Automobile Windshield

September 16, 2009 By Tom Read Leave a Comment

Glass expert performs a glass failure analysis on a cracked automobile windshield. Records show that the windshields on this particular make and model of automobile are cracking at a very high rate. The windshield shown here is the third replacement in two years. In this case, glass failure analysis shows that the crack started at […]

Filed Under: Failure Analysis Tagged With: Automobile, Bending Stress, Thermal Stress, Windshield

Plastic Failure Analysis

October 27, 2008 By Tom Read Leave a Comment

Plastics failure expert performs a root cause failure analysis on a plastic automobile door handle. The handle is from a van’s sliding side door. The product failure occurred when the user was trying to close the van’s sliding door. This is a products liability issue because the handle failed in a brittle manner and a […]

Filed Under: Failure Analysis Tagged With: Automobile, Door Handle, Manufacturing Defects, Molding Defect, Plastic Failure

Read Consulting Failure Analysis

Thomas L. Read, PhD,
1435 Fulton Road Santa Rosa, CA
Phone: 707-494-5089
email: info@readconsulting.com

  • Home
  • About
  • Experience
  • Expertise
  • Laboratory
  • Failure Analysis
  • Blog
  • White Papers

Read Consulting Failure Analysis

Thomas L. Read, PhD,
1435 Fulton Road Santa Rosa, CA
Phone: 707-494-5089
email: info@readconsulting.com

Connect With Read Consulting

FacebookTwitterLinkedinYouTubeRSS Feed

Registered Professional Engineer

Thomas L. Read, PhD., CEO
Registered Professional Engineer
Certificate No. MF002174
State of California.

Copyright © 2025 Read Consulting · Materials Failure Analysis And Process Engineering