Read Consulting

Materials Failure Analysis and Process Engineering

  • Home
  • About
  • Contact
FacebookTwitterLinkedinYouTubeRSS Feed

Home Featured

  • Experience
  • Failure Analysis
  • Processing
  • Laboratory
  • Blog
  • White Papers
You are here: Home / Archives for Failure Analysis

Read Consulting Failure Analysis Blog

In addition, READ CONSULTING provides services to industry in the areas of failure analysis, process development and process improvement. Read Consulting is prepared to use its experience and expertise to analyze customers' specific problems.

Steel Tank Failure: Metal Failure Analysis of a Collapsed Bolted Steel Holding Tank

May 28, 2013 By Tom Read Leave a Comment

 Read Consulting was contracted to perform a root cause failure analysis on a collapsed 40,000 gallon water holding tank. Metal corrosion is the root cause of the tank failure. The failure originated at the bottom of the tank on the West side. The initial failure resulted from corrosion on bolts holding the side of the […]

Filed Under: Failure Analysis Tagged With: Collapsed Bolted Steel, Holding Tank, Metal, Steel, Tank Failure

Glass Expert Performs Failure Analysis on Glass Blender Jar

April 19, 2013 By Tom Read Leave a Comment

The glass experts at Read Consulting in Santa Rosa California performed a glass failure analysis on a borosilicate glass blender jar that failed in a glass thermal shock test as a part of product qualification. The jar is operated with a stainless steel spoon inside. It is then subjected to thermal shock test by heating […]

Filed Under: Failure Analysis Tagged With: Borosilicate Glass, Glass Blender, Jar, Thermal Shock

Glass Experts Examine Interior Wall of Champagne Bottles

April 10, 2013 By Tom Read Leave a Comment

The gas in champagne and most other sparkling wines results from the addition of a small amount of sugar after fermentation has ended. After the sugar addition, bottle is capped. The sugar reacts with remnant yeast and converts to alcohol and carbon dioxide. Because the bottle is sealed, the CO2 gas enters the wine as […]

Filed Under: Failure Analysis Tagged With: Bottle, Champagne Bottle, Glass, Interior Wall, M anufacturing Defect

Tempered Glass Oven Door Thermal Shock Test Failures

March 29, 2013 By Tom Read Leave a Comment

 Glass experts at Read Consulting  performed a glass failure analysis on several fully tempered glass oven doors that failed in an unexpected manner during thermal shock testing. 100% of these doors failed the glass thermal shock test. The subject tempered glass doors were painted with a 20µ thick picture frame on one side (top left […]

Filed Under: Failure Analysis Tagged With: Glass, Oven Door, Tempered Glass, Thermal Shock

Glass Experts Examine Hotel Window Defect

March 20, 2013 By Tom Read Leave a Comment

   The glass experts at Read Consulting performed a window defect analysis on defective windows at a hotel. The windows began to appear dirty, and no amount of cleaning could remove the “dirt”. When initially installed, the insulated glass (I.G.) windows appeared normal. However, over time they began to appear perpetually dirty. Using a microscope […]

Filed Under: Failure Analysis Tagged With: Hotel Window, Manufacturing Defect, Product Liability, Window Defect

  • « Previous Page
  • 1
  • …
  • 16
  • 17
  • 18
  • 19
  • 20
  • …
  • 52
  • Next Page »

Read Consulting Failure Analysis

Thomas L. Read, PhD,
1435 Fulton Road Santa Rosa, CA
Phone: 707-494-5089
email: info@readconsulting.com

  • Home
  • About
  • Experience
  • Expertise
  • Laboratory
  • Failure Analysis
  • Blog
  • White Papers

Read Consulting Failure Analysis

Thomas L. Read, PhD,
1435 Fulton Road Santa Rosa, CA
Phone: 707-494-5089
email: info@readconsulting.com

Connect With Read Consulting

FacebookTwitterLinkedinYouTubeRSS Feed

Registered Professional Engineer

Thomas L. Read, PhD., CEO
Registered Professional Engineer
Certificate No. MF002174
State of California.

Copyright © 2025 Read Consulting · Materials Failure Analysis And Process Engineering