Read Consulting

Materials Failure Analysis and Process Engineering

  • Home
  • About
  • Contact
FacebookTwitterLinkedinYouTubeRSS Feed

Home Featured

  • Experience
  • Failure Analysis
  • Processing
  • Laboratory
  • Blog
  • White Papers
You are here: Home / Archives for Tom Read

Failure Analysis Expert Witness Examines Failed Rivet

October 28, 2009 By Tom Read Leave a Comment

A failure analysis expert witness performed a rivet fialure analysis of a rivet involved in a ladder failure. The failed rivet, which is a hollow end rivet, was found to be too short for the intended application. The photo on the upper left is a cross section of the failed rivet in question. The clinch […]

Filed Under: Failure Analysis Tagged With: Clinch Allowance, Failed Rivet, Fatigue

Failure Analysis of Corroding Stainless Steel Probe

October 20, 2009 By Tom Read Leave a Comment

  Failure analysis expert was asked to determine the cause of deterioration of the tip of a stainless steel (SS) probe used to measure the level of hot tomato juice in a vat. Chemical analysis identified the steel as 304 SS with 0.082% carbon. At best, the carbon limit is on the high end in […]

Filed Under: Failure Analysis Tagged With: Corrosion, Stainless Steel, Stainless Steel Probe

Glass Failure Analysis Expert Examines Failed Champagne Bottle

October 14, 2009 By Tom Read Leave a Comment

Glass failure analysis expert performed a root cause failure analysis on a exploding champagne bottle. The user claimed that the bottle exploded when she was using her thumbs to remove the cork. Examination of the bottle revealed a horizontal crush point. This damage was severe and would not have survived the corking operation at the […]

Filed Under: Failure Analysis Tagged With: Bottle, Champagne Bottle, Glass, Liability Hoax

Glass Failure Analysis Expert Discusses Window Damage

October 9, 2009 By Tom Read Leave a Comment

    Window damage expert examines window scratching from a metal blade (see above photo). A California glass failure analysis expert was asked to evaluate window damage at a newly constructed home. The windows at this site were scratched during cleaning with a six-inch metal blade. The blade traps abrasive dirt and drags it across […]

Filed Under: Failure Analysis Tagged With: Glass Expert, New Construction, Window, Window Scratching

Failure Analysis of a Stair Tread Wood Failure:

October 7, 2009 By Tom Read Leave a Comment

Failure analysis expert examined a failed wood stair tread that was the cause of a fall and an injury. The failed tread is shown still mounted in the photo on the left. The re-assembled tread is shown in the photo on the uper right. This tread was screwed in place when the wood was green; […]

Filed Under: Failure Analysis Tagged With: Construction Defect, Stair Tread, Wood Failure

  • « Previous Page
  • 1
  • …
  • 46
  • 47
  • 48
  • 49
  • 50
  • …
  • 60
  • Next Page »

Read Consulting Failure Analysis

Thomas L. Read, PhD,
1435 Fulton Road Santa Rosa, CA
Phone: 707-494-5089
email: info@readconsulting.com

  • Home
  • About
  • Experience
  • Expertise
  • Laboratory
  • Failure Analysis
  • Blog
  • White Papers

Read Consulting Failure Analysis

Thomas L. Read, PhD,
1435 Fulton Road Santa Rosa, CA
Phone: 707-494-5089
email: info@readconsulting.com

Connect With Read Consulting

FacebookTwitterLinkedinYouTubeRSS Feed

Registered Professional Engineer

Thomas L. Read, PhD., CEO
Registered Professional Engineer
Certificate No. MF002174
State of California.

Copyright © 2025 Read Consulting · Materials Failure Analysis And Process Engineering