Manufacturing Engineer discusses bungee cord safety from a safety engineering view point. Stretching a bungee cord imparts a significant amount of potential energy into the system that can be released and make the end hook a dangerous projectile. There are safety warnings on most cords; however, these are often ignored or torn off. It has […]
Manufacturing Engineer and Safety Engineer Discusses Crane Safety
Manufacturing Engineer and Safety Engineer advises, for factory safety, that if a crane is being used to lift objects over and into baths that contain harmful liquids such as acids, caustics and high temperature liquids. the event should be treated as a “lock out tag out” type of event. All personnel should be cleared from […]
Glass Failure Analysis of Swimming Pool Tiles
Glass failure analysis expert performs a failure analysis of cracked glass swimming pool tiles. The photo on the upper left is of one of the cracked tiles. This is a clear glass tile made from re-cycled glass. The failure analysis, photo on the upper right, shows that these tiles were cracking from the backside of […]
Glass Bottle Failure Analysis
Glass failure analysis expert performed a root cause failure analysis on a bottle failure. The cap on this bottle had not been removed. The failure analysis revealed a manufacturing defect on the bottle interior. On the upper left photo is a 30X photomicrograph of a portion of the origin on the fracture surface. The arrows […]
Glass Failure Analysis of Tramp Glass
As a part of a product liability case, a glass failure expert was asked to determine if a piece of “tramp glass” found by a consumer (Upper left photo) was put into the bottle after it was opened. There was a companion bottle from the same six pack that also had glass contamination(upper right photo). […]
- « Previous Page
- 1
- …
- 45
- 46
- 47
- 48
- 49
- …
- 57
- Next Page »