Read Consulting

Materials Failure Analysis and Process Engineering

  • Home
  • About
  • Contact
FacebookTwitterLinkedinYouTubeRSS Feed

Home Featured

  • Experience
  • Failure Analysis
  • Processing
  • Laboratory
  • Blog
  • White Papers
You are here: Home / Archives for Failure Analysis

Read Consulting Failure Analysis Blog

In addition, READ CONSULTING provides services to industry in the areas of failure analysis, process development and process improvement. Read Consulting is prepared to use its experience and expertise to analyze customers' specific problems.

Glass Fracture Due to Liquid Pressure

August 20, 2010 By Tom Read Leave a Comment

Glass failure analysis expert witness performs a failure analysis on a hollow glass tube that failed due to internal pressure. The glass fracture initiated at a small bruise on the outer surface of the glass tube. The upper left 25X photomicrograph gives an overview of the failure. One can see that the glass fracture analysis […]

Filed Under: Failure Analysis Tagged With: Glass, Glass Fracture, Glass Tube, Photomicrograph

GLass Expert Discusses Chill Cracks

August 7, 2010 By Tom Read Leave a Comment

Glass failure analysis expert witness discusses a common glass bottle manufacturing defect. After the bottle has been formed it is removed hot from the clam shell tool. If it encounters any localized cooling at this stage, it can form a manufacturing defect called a “chill crack”. Thermal shock cause the cooled area to shrink, and […]

Filed Under: Failure Analysis Tagged With: Bottle, Chill Cracks, Glass, Glass Failure

Cosmetic Bottle Failure Analysis

August 2, 2010 By Tom Read Leave a Comment

Glass failure analysis expert witness performs failure analysis on a broken small cosmetic bottle. This bottle failure occured when it was being capped on the line. The objective of the analysis was to determine the cause of the failure and to advise the bottle manufacturer. The bottle broke into two pieces, and these are shown […]

Filed Under: Failure Analysis Tagged With: Bottle, Cosmetic Bottle, Glass, Manufacturing Defect

Pyrex Glass Failure Analysis: Glass Baking Dish Failure Analysis

July 12, 2010 By Tom Read Leave a Comment

California glass expert witness performed a failure analysis on a pyrex glass baking dish. This dish was made from pyrex borosilicate glass, and the glass failure occured as the dish was being removed from the oven. The failure initiated at an internal glass defect. The defect appears to be a colapsed bubble (seed) in the […]

Filed Under: Failure Analysis Tagged With: Borosilicate Glass, Glass, Pyrex, Tempered Glass

Champagne Bottle Glass Failure Analysis

July 4, 2010 By Tom Read Leave a Comment

Glass failure expert performed a complete glass failure analysis on numerous champagne bottles that had failed in the riddling process. These bottles are used for riddling and they are made from a large amount of re-cycled glass. Several of these bottle failures initiated at a site that had a piece of unmelted cullet (Note: Cullet […]

Filed Under: Failure Analysis Tagged With: Bottle, Champagne Bottle, Glass, Unmelted Cullet

  • « Previous Page
  • 1
  • …
  • 33
  • 34
  • 35
  • 36
  • 37
  • …
  • 52
  • Next Page »

Read Consulting Failure Analysis

Thomas L. Read, PhD,
1435 Fulton Road Santa Rosa, CA
Phone: 707-494-5089
email: info@readconsulting.com

  • Home
  • About
  • Experience
  • Expertise
  • Laboratory
  • Failure Analysis
  • Blog
  • White Papers

Read Consulting Failure Analysis

Thomas L. Read, PhD,
1435 Fulton Road Santa Rosa, CA
Phone: 707-494-5089
email: info@readconsulting.com

Connect With Read Consulting

FacebookTwitterLinkedinYouTubeRSS Feed

Registered Professional Engineer

Thomas L. Read, PhD., CEO
Registered Professional Engineer
Certificate No. MF002174
State of California.

Copyright © 2025 Read Consulting · Materials Failure Analysis And Process Engineering