Read Consulting

Materials Failure Analysis and Process Engineering

  • Home
  • About
  • Contact
FacebookTwitterLinkedinYouTubeRSS Feed

Home Featured

  • Experience
  • Failure Analysis
  • Processing
  • Laboratory
  • Blog
  • White Papers
You are here: Home / Archives for Failure Analysis

Read Consulting Failure Analysis Blog

In addition, READ CONSULTING provides services to industry in the areas of failure analysis, process development and process improvement. Read Consulting is prepared to use its experience and expertise to analyze customers' specific problems.

Brass Plumbing Failure Analysis Stress Corrosion Cracking (SCC)

October 21, 2011 By Tom Read Leave a Comment

California failure analysis expert witness has analyzed numerous plumbing failures involving yellow brass (i.e. brass with more than 30% Zn in the alloy). The two major brass failure modes in yellow brass are dezincification and stress corrosion cracking. Above are two samples of stress corrosion cracking. Sress corrosion of yellow brass commonly involves the presence of ammonia along with the […]

Filed Under: Failure Analysis Tagged With: Brass, Cracking, Plumbing, Stress Corrosion

California Failure Analysis Expert Witness Examines Window Damage

October 15, 2011 By Tom Read Leave a Comment

Window cleaning is an important final step in finishing off construction of a building. This fact is sometimes ignored, and improper cleaning results in significant damage to the new windows. This in turn leads to a lawsuit. The glass association of North America (GANA) has published a bulleton to instruct as to the proper window cleaning […]

Filed Under: Failure Analysis Tagged With: Glass, Window, Window Cleaning, Window Damage

Failure Analysis of Glass Pot: Visions Cookware

October 5, 2011 By Tom Read Leave a Comment

A failure analysis  was performed on a broken 5 quart stove top glass pot. The origin was determined with optical microscopy, and the broken pot was assembled to show how cracking proceeded. The re-assembled pot is shown upside down in the upper left photograph. The failure originated at a preexisting “chip” on the interior at […]

Filed Under: Failure Analysis Tagged With: Cookware, Glass, Manufacturing Defect, Tempered Glass

Rubber Failure Analysis Demonstrates Rubber Fatigue

September 27, 2011 By Tom Read Leave a Comment

California rubber failure analysis expert performs a failure analysis on a rubber paddle. This piece failed as a result of fatigue. The fatigue failure initiated on the outer surface at a stress riser and progressed inwards. This is demonstrated by the photomicrographs above. Upper left is taken at 10X. Upper right is taken at 40X. […]

Filed Under: Failure Analysis Tagged With: Fatigue, Photomicrograph, Rubber Failure

Medical Device Failure Analysis of a Catheter

September 20, 2011 By Tom Read Leave a Comment

California failure analysis expert witness performed a failure analysis on a piece of rubber that had been removed from a patient’s bladder. The piece was compared with the tip of a new exemplar catheter. Although the piece that was removed surgically was encrusted with salts, it was shown to be part of a catheter.

Filed Under: Failure Analysis Tagged With: Catheter, Medical Device, Rubber

  • « Previous Page
  • 1
  • …
  • 24
  • 25
  • 26
  • 27
  • 28
  • …
  • 52
  • Next Page »

Read Consulting Failure Analysis

Thomas L. Read, PhD,
1435 Fulton Road Santa Rosa, CA
Phone: 707-494-5089
email: info@readconsulting.com

  • Home
  • About
  • Experience
  • Expertise
  • Laboratory
  • Failure Analysis
  • Blog
  • White Papers

Read Consulting Failure Analysis

Thomas L. Read, PhD,
1435 Fulton Road Santa Rosa, CA
Phone: 707-494-5089
email: info@readconsulting.com

Connect With Read Consulting

FacebookTwitterLinkedinYouTubeRSS Feed

Registered Professional Engineer

Thomas L. Read, PhD., CEO
Registered Professional Engineer
Certificate No. MF002174
State of California.

Copyright © 2025 Read Consulting · Materials Failure Analysis And Process Engineering