Glass failure analysis expert performs a root cause failure analysis on a bottle failure. In this case a manufacturing defect was causing numerous failures on a manufacturing line. The tops of these small bottles were coming off. The upper left photomicrograph is with the two halves of the bottle re-assembled. […]
Wine Bottle Failure Analysis
Glass failure analysis expert locates the origin of a failed wine bottle. Thye failure origin is at the top of the bottle on the inside rim. The origin is a crush spot on the inner rim. This was too high to be caused by a corkscrew. It is believed that the damage occurred […]
Glass Damage from Weld Spatter
At a new condominium complex, numerous windows were discovered to have been damaged by weld spatter. Upper left is a photograph of typical damage found on the affected windows. A glass expert examined the damage to determine if the windows could be repaired. A glass failure analysis was performed to evaluate the damage level. Microscopic […]
Glass Expert Performs Sauce Bottle Glass Failure Analysis
Glass expert peformed a bottle failure analysis on a broken bottle of steak sauce . Intitally it was stated that this was a new and unopened bottle; however, examination revealed that there was sauce on the bottle threads. In addition, the “band” below the plastic lid was not connected. From this it was concluded that […]
Failure Analysis Expert Discusses Metal Fatigue
Failure analysis was performed on a failed pin from a large tractor. The upper right gives an overview of the pin. Upper left is a close up of the fracture surface. The fatigue crack originated at the top of the photo and progressed downward until the final overload failure.
- « Previous Page
- 1
- …
- 46
- 47
- 48
- 49
- 50
- …
- 57
- Next Page »