Read Consulting

Materials Failure Analysis and Process Engineering

  • Home
  • About
  • Contact
FacebookTwitterLinkedinYouTubeRSS Feed

Home Featured

  • Experience
  • Failure Analysis
  • Processing
  • Laboratory
  • Blog
  • White Papers
You are here: Home / Archives for Failure Analysis

Read Consulting Failure Analysis Blog

In addition, READ CONSULTING provides services to industry in the areas of failure analysis, process development and process improvement. Read Consulting is prepared to use its experience and expertise to analyze customers' specific problems.

Jet Aircraft Windshield Failure Due to a Bird Strike

February 23, 2024 By Tom Read Leave a Comment

Glass Failure Experts at Read Consulting were asked to perform  a failure analysis on a jet aircraft windshield.  This was obviously an impact failure. There was little or no crushed glass at the origin. This indicates that it was not hit by a hard object. When landing the airspeed is approximately 150 MPH. So any […]

Filed Under: Failure Analysis Tagged With: Jet Aircraft Windshield Failure

Glass Failure Expert examines a Fractured Whisky Bottle

February 1, 2024 By Tom Read 2 Comments

A California glass expert  examined a broken whisky bottle. The glass failure analysis revealed that the bottle was hit with a sharp hard object which penetrated the glass. The results indicate an impact failure.

Filed Under: Failure Analysis

X-ray Safety Glass Failure Analysis

January 26, 2024 By Tom Read Leave a Comment

Read Consulting performed a failure analysis on a pair of safety glasses involved in a reported accident. These glasses are intended to be used by X-ray technicians. The failed lens is fully annealed glass; it appears the glass failure was the result of an impact on the lens inside surface by a hard, small diameter […]

Filed Under: Failure Analysis

Appliance Glass Failure: Glass Failure on a Clothes Washer Door

December 28, 2023 By Tom Read Leave a Comment

Read Consulting was engaged to perform a glass fracture analysis on a broken clothes washer door failure. The glass is 5mm thick heat strengthened glass. It was claimed that the glass failed “spontaneously” and caused an injury. Examination of the glass remaining on the door revealed that the glass failed from impact. There is a […]

Filed Under: Failure Analysis

Plastic Failure Expert Analyzes a Failed Plastic Lawn Chair

September 4, 2023 By Tom Read Leave a Comment

 Read Consulting was engaged to examine a failed polypropylene (PP) lawn chair used poolside in a desert environment. In this type of environment, air temperatures can reach higher than 110°F. This means the surface of a dark chair can reach temperatures higher than 150°F. Previous studies on polypropylene plumbing failures have shown that hot chlorinated […]

Filed Under: Failure Analysis

  • « Previous Page
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • …
  • 52
  • Next Page »

Read Consulting Failure Analysis

Thomas L. Read, PhD,
1435 Fulton Road Santa Rosa, CA
Phone: 707-494-5089
email: info@readconsulting.com

  • Home
  • About
  • Experience
  • Expertise
  • Laboratory
  • Failure Analysis
  • Blog
  • White Papers

Read Consulting Failure Analysis

Thomas L. Read, PhD,
1435 Fulton Road Santa Rosa, CA
Phone: 707-494-5089
email: info@readconsulting.com

Connect With Read Consulting

FacebookTwitterLinkedinYouTubeRSS Feed

Registered Professional Engineer

Thomas L. Read, PhD., CEO
Registered Professional Engineer
Certificate No. MF002174
State of California.

Copyright © 2025 Read Consulting · Materials Failure Analysis And Process Engineering