Read Consulting

Materials Failure Analysis and Process Engineering

  • Home
  • About
  • Contact
FacebookTwitterLinkedinYouTubeRSS Feed

Home Featured

  • Experience
  • Failure Analysis
  • Processing
  • Laboratory
  • Blog
  • White Papers
You are here: Home / Archives for Tom Read

California Failure Analysis Expert Witness Examines Failed Glass Pool Tiles

April 18, 2011 By Tom Read Leave a Comment

California glass expert performed a failure analysis on several broken glass tiles. These tiles were above the water line in a swimming pool. The failed tiles were removed and submitted for failure analysis. It was impossible to open the tiles to examine the fracture surface. The thin set mortar had “squeezed” into the crack and […]

Filed Under: Failure Analysis Tagged With: Expert Witness, Glass, Photomicrograph, Pool Tiles

Glass Fracture, Califirnia Glass ExpertPerforms Bottle Failure Analysis

March 28, 2011 By Tom Read Leave a Comment

California failure analysis expert witness was asked to perform a detailed failure analysis of a broken wine bottle. Glass fractography was used to determine the root cause failure mode. The failure originated at damage caused by the prop on the cork screw. The fact that there were two damage sites on opposite sides of the […]

Filed Under: Failure Analysis Tagged With: Bottle, Fractography, Glass, Manufacturing Defect

California Coating Expert Performs Failure Analysis of Epoxy Paint

March 24, 2011 By Tom Read Leave a Comment

A California coating expert was confronted with a municipal water tank with a rubbery epoxy coating. The complaint was that the epoxy paint was not properly mixed, and it had not cured properly. During the coating failure analysis, the study showed that the epoxy paint was aliphatic amine cured. In addition, the tank was painted […]

Filed Under: Failure Analysis Tagged With: Adhesion Test, Epoxy Paint, Product Defect, Rubbery Epoxy

Glass Expert Examines a Tempered Glass Window Failure

March 19, 2011 By Tom Read Leave a Comment

California failure analysis expert uses glass fractography to perform a glass failure analysis on a tempered glass window failure. The glass fracture analysis showed that the window failure was a result of heating the glass in the center. Due to the heat, the center of the window expanded. This created additional tensile stress on the […]

Filed Under: Failure Analysis Tagged With: Expert Witness, Glass, Tempered Glass, Thermal Stress

California Glass Expert Performs a Failure Analysis on a Glass Bowl

February 25, 2011 By Tom Read Leave a Comment

A glass failure analysis was performed on a glass mixing bowl. An overview of the failed glass bowl is shown in the upper left photograph. This bowl failed as a result of thermal stresses. The crack originated at the bottom of the bowl and spread in one direction around the entire bottom. The thermal stresses […]

Filed Under: Failure Analysis Tagged With: Fracture, Glass Bowl, Mixing Bowl, Thermal Stress

  • « Previous Page
  • 1
  • …
  • 36
  • 37
  • 38
  • 39
  • 40
  • …
  • 60
  • Next Page »

Read Consulting Failure Analysis

Thomas L. Read, PhD,
1435 Fulton Road Santa Rosa, CA
Phone: 707-494-5089
email: info@readconsulting.com

  • Home
  • About
  • Experience
  • Expertise
  • Laboratory
  • Failure Analysis
  • Blog
  • White Papers

Read Consulting Failure Analysis

Thomas L. Read, PhD,
1435 Fulton Road Santa Rosa, CA
Phone: 707-494-5089
email: info@readconsulting.com

Connect With Read Consulting

FacebookTwitterLinkedinYouTubeRSS Feed

Registered Professional Engineer

Thomas L. Read, PhD., CEO
Registered Professional Engineer
Certificate No. MF002174
State of California.

Copyright © 2025 Read Consulting · Materials Failure Analysis And Process Engineering